Current voltage transformer vs potential transformer: key differences
Article overview
This guide compares a current voltage transformer — a dual-function instrument transformer that measures both current and voltage in a single housing — against a dedicated potential transformer. You will learn how each device works, where each excels, and how to pick the right one for metering or protection applications in medium-voltage power systems.
Table of contents
- 1. What is a current voltage transformer?
- 2. What is a potential transformer and how does it differ?
- 3. Core technical differences: a side-by-side comparison
- 4. Accuracy classes and measurement standards explained
- 5. Application scenarios: metering vs. protection
- 6. How to choose the right instrument transformer for your project
- 7. Installation and safety considerations in Philippine MV systems
- 8. Frequently asked questions
What is a current voltage transformer?
A current voltage transformer is a combined instrument transformer that integrates both a current transformer (CT) and a voltage transformer (VT) into a single, compact unit, allowing simultaneous measurement of line current and line voltage from one installation point. This dual-function design reduces switchgear footprint, simplifies wiring, and lowers total installed cost — advantages that matter greatly in medium-voltage (MV) substations where panel space is at a premium.
In practice, the CT section steps down high line currents (for example, 400 A or 630 A) to a standardised secondary output of 1 A or 5 A, while the VT section steps down MV line voltage — typically 11 kV, 22 kV, or 33 kV in the Philippine distribution grid — to a safe secondary level of 100 V or 110 V. Both outputs feed directly into revenue metering equipment or protection relays without requiring separate primary connections.
Why do so many engineers overlook this option when designing compact substations? The combined CT VT unit has been a standard product category in IEC 61869 since its revision, yet procurement teams sometimes default to ordering separate CTs and PTs out of habit. Based on actual project reviews in the MV distribution sector, a combined current voltage transformer can cut the number of primary bushings by up to 40%, directly reducing potential leak points and long-term maintenance overhead.
It is worth noting that a combined unit is not simply two transformers bolted together. The magnetic circuits are engineered to remain electrically isolated from each other within the same oil-filled or gas-insulated housing, ensuring that the current measurement core does not interfere with the voltage measurement core. This internal isolation is critical for maintaining the accuracy class of each winding independently.
For a deeper technical foundation on how the CT section operates, see this resource on current transformer basics.

What is a potential transformer and how does it differ?
A potential transformer (PT), also called a voltage transformer (VT), is a dedicated instrument transformer designed exclusively to step down high AC voltage to a lower, measurable secondary voltage while maintaining precise voltage ratio accuracy. Unlike the combined current voltage transformer, it handles only voltage measurement — no current sensing is performed within the same unit.
How a potential transformer works
The PT operates on the same electromagnetic induction principle as a power transformer, but it is optimised for minimal ratio error and phase displacement rather than power transfer efficiency. The primary winding connects directly across the line voltage, and the secondary winding — wound with a tightly controlled turns ratio — delivers a proportional low voltage to meters or relays. Because the secondary burden (connected load) is very small, the PT operates near its no-load condition, which is precisely where its accuracy is highest.
Industry consensus is that a standalone PT offers superior voltage accuracy compared to the VT winding inside a combined unit when the application demands the highest metering class — 0.1 or 0.2 accuracy class — for fiscal or revenue metering where even small ratio errors translate directly into billing discrepancies affecting utility revenues.
Where PTs are typically deployed
Standalone potential transformers are common in large transmission substations (69 kV and above), capacitor voltage transformer (CVT) installations at extra-high voltages, and any situation where the current measurement function is already handled by separately installed bar-type or bushing CTs. In the Philippines, distribution utilities operating under the ERC's metering standards routinely specify standalone PTs at primary substations to ensure billing-grade accuracy is independently verifiable and replaceable without disturbing the CT circuit.
That said, the standalone PT does introduce its own cost: separate primary connections, additional insulators, independent oil maintenance schedules, and more complex secondary wiring. For engineers working on 11 kV or 22 kV ring-main unit (RMU) installations — a very common scenario in Philippine commercial and industrial projects — this added complexity often tips the decision toward a combined unit.
Core technical differences: a side-by-side comparison
The clearest way to understand the distinction is to look at both devices across the same technical dimensions. The table below presents real specification data representative of MV instrument transformers used in 11–33 kV systems.
| Parameter | Current voltage transformer (combined) | Standalone potential transformer (PT) |
|---|---|---|
| Primary function | Simultaneous CT + VT measurement | Voltage measurement only |
| Typical voltage range | 11 kV – 110 kV | 11 kV – 500 kV (CVT above 110 kV) |
| IEC standard | IEC 61869-3 / IEC 61869-2 | IEC 61869-3 |
| Metering accuracy class (VT winding) | 0.2 – 0.5 | 0.1 – 0.5 |
| Protection class (CT winding) | 5P10, 5P20, 10P10 | N/A (no CT winding) |
| Typical secondary outputs | 1 A or 5 A (CT); 100 V or 110 V (VT) | 100 V or 110 V (VT only) |
| Footprint / panel space | Compact — single mounting | Larger — requires separate mounting |
| Relative installed cost (MV, 22 kV) | Lower (fewer primary connections) | Higher when CT also required separately |
| Maintenance complexity | Moderate — single unit to service | Low for PT alone; increases if separate CT added |
For a broader overview of how both device types fit within the instrument transformer family, the article on current and voltage transformers overview provides useful industry context.
Accuracy classes and measurement standards explained
Accuracy class is arguably the most critical specification when selecting any measurement transformer, because errors at the instrument transformer level propagate directly into energy billing and protection system response times.
Metering accuracy classes
Under IEC 61869, voltage transformer accuracy classes for metering are expressed as 0.1, 0.2, 0.5, 1, and 3. A class 0.2 PT maintains a voltage ratio error of no more than ±0.2% and a phase displacement of no more than ±10 minutes across the rated burden range. For revenue metering applications — where billing accuracy directly affects both the utility's income and industrial customers' operational costs — class 0.2 is widely considered the minimum acceptable standard. Some Philippine utilities operating fiscal metering at primary substations specify class 0.1 for high-load feeders.
Current transformer accuracy classes for metering follow a similar structure: 0.1, 0.2, 0.2S, 0.5, 0.5S, and 1. The "S" suffix (e.g., 0.2S) indicates the transformer maintains its accuracy down to 1% of rated current, which is important for feeders with highly variable loads — a common situation in Philippine commercial districts where daily load cycles swing widely between off-peak and peak hours.
Protection accuracy classes
Protection-class CTs are designated differently. A marking of 5P20 means the composite error does not exceed 5% at 20 times the rated current (the accuracy limit factor). Protection relays for overcurrent, earth fault, and differential protection depend on this specification to operate correctly during fault conditions. The VT winding in a combined current voltage transformer typically carries a separate protection class winding (3P or 6P) alongside the metering winding.
"The selection of instrument transformer accuracy class is not merely a technical preference — it is a financial and legal obligation. Under IEC 62053 and national metering codes, errors in revenue metering equipment can expose utilities to significant revenue losses and regulatory penalties."
— Summarised from IEC technical guidance on instrument transformers for revenue metering, 2024 edition
Current transformer accuracy in engineering applications is discussed in detail in published research accessible via current transformer in engineering.
Application scenarios: metering vs. protection
Choosing between a combined current voltage transformer and a standalone PT is rarely a purely technical exercise. It depends heavily on the specific use case, the system voltage level, and what the secondary outputs need to feed.
Revenue metering applications
For revenue metering transformer installations at 11 kV or 22 kV — the two most common distribution voltages in the Philippines — a combined CT VT unit is typically the most cost-effective and space-efficient solution. The energy metering equipment (electronic multifunction meters) installed at commercial and industrial customer connection points requires both current and voltage inputs, so having a single combined unit that delivers both eliminates one set of primary connections and reduces the risk of wiring errors during commissioning.
Real-world commissioning experience shows that termination errors in secondary wiring are among the most frequent causes of initial metering inaccuracy. Fewer terminals mean fewer opportunities for error. That said, if the required accuracy class for the VT winding is 0.1 — which some high-value industrial accounts or inter-utility settlement points demand — a standalone potential transformer remains the preferred choice because dedicated PT designs are more readily certified to that level.
Protection relay applications
Protection relay transformer applications have different priorities. Distance protection, differential protection, and directional overcurrent schemes require both voltage and current quantities simultaneously, which makes the combined current voltage transformer a natural fit. The CT winding provides current for relay operation, while the VT winding supplies the voltage reference needed for impedance calculation or directional discrimination.
Of course, there are situations where a standalone PT makes more sense for protection: when a busbar protection scheme requires voltage from a single point shared across multiple feeders, a large electromagnetic PT or CVT connected directly to the busbar may serve multiple protection functions at once — a task impractical for individual combined units on each feeder. MV instrument transformer selection for such schemes should always involve the protection engineer and relay coordinator.
How to choose the right instrument transformer for your project
The decision process can be structured into a logical sequence. Use the following steps as a practical selection guide for any MV substation or feeder installation.
- Define the primary function: Determine whether the installation requires revenue metering only, protection only, or both. If both are needed from the same primary connection point, a combined current voltage transformer is likely the most practical starting choice.
- Confirm system voltage and current rating: Identify the nominal system voltage (e.g., 11 kV, 22 kV, 33 kV) and the maximum continuous current of the feeder. These define the primary ratings of the CT and VT sections.
- Specify required accuracy classes: For metering, determine whether 0.2 or 0.5 class suffices, or whether 0.1 class is contractually or regulatorily required. For protection, specify the accuracy limit factor (e.g., 5P20 or 10P10).
- Assess available space and switchgear type: Ring-main units (RMUs) and compact secondary substations common in Philippine urban distribution networks often have limited bay dimensions. A combined unit's smaller footprint may be the deciding factor.
- Check secondary burden: Calculate the total secondary burden (connected meters, relays, and wiring resistance). Both CT and VT windings must be loaded within their rated burden to maintain accuracy class. Overloading the secondary degrades ratio accuracy.
- Verify applicable standards and utility requirements: In the Philippines, Meralco and other distribution utilities may have specific technical specifications. Confirm that the chosen measurement transformer meets IEC 61869 and any local grid code requirements before procurement.
- Evaluate total cost of ownership: Factor in not just purchase price but installation costs, number of primary cable terminations, and long-term maintenance intervals. A dual function transformer often delivers lower total cost over a 20–30 year asset life.
Installation and safety considerations in Philippine MV systems
Installation practices for electrical measuring devices at medium voltage involve strict safety protocols, and the Philippine context adds specific regulatory and environmental factors that engineers must account for.
Grounding and secondary circuit safety
One of the most critical installation rules for any instrument transformer — whether a combined current voltage transformer or a standalone PT — is that the secondary circuit must never be left open-circuited under energised conditions. For a CT, an open secondary under primary current creates a dangerously high voltage across the secondary terminals, risking insulation breakdown and injury. The secondary of a PT, by contrast, should never be short-circuited, as this would draw excessive fault current through the primary winding. Both rules seem straightforward, but they are frequently violated during maintenance if secondary isolating links are not clearly labelled.
All secondary terminals must be reliably grounded at one point in the circuit, per IEC 61869 and Philippine Electrical Code (PEC) requirements. Grounding prevents dangerous floating potentials from appearing on secondary terminals during fault conditions on the primary side.
Environmental and climate considerations for the Philippines
The Philippines' tropical climate — characterised by high ambient temperatures (often 35–40°C in lowland areas), high relative humidity, and salt-laden coastal air — imposes specific demands on oil-filled or resin-cast MV instrument transformers. Creepage distances must comply with IEC 60071 pollution level requirements; most Philippine installations fall within pollution level III or IV in coastal and industrial zones, requiring extended creepage on outdoor-type bushings.
Just like a ship's hull needs regular anti-corrosion treatment to perform reliably in saltwater, an outdoor electrical measuring device in a coastal Philippine substation needs adequate insulation creepage and appropriate housing materials to maintain its rated performance over decades. Oil-filled units require periodic dissolved gas analysis (DGA) testing to detect early insulation degradation, while resin-cast or SF₆-insulated units offer a maintenance-free alternative increasingly favoured in new RMU installations.
Procurement teams sourcing power transformer Philippines specifications should ensure that vendors can supply type-test reports conducted under conditions representative of local climate, including temperature rise tests at 40°C ambient and humidity cycling tests per IEC 60068 standards.
Frequently asked questions
Can a current voltage transformer replace both a separate CT and a standalone PT in all applications?
In most 11–33 kV metering and protection applications, yes. However, when accuracy class 0.1 is required for revenue metering, or when a single PT must serve multiple feeders simultaneously, a standalone potential transformer is the more appropriate choice. Always confirm accuracy class requirements before substituting.
What accuracy class should I specify for revenue metering at 22 kV?
For most commercial and industrial revenue metering in the Philippines, accuracy class 0.2 for both CT and VT windings satisfies ERC metering requirements and IEC 62053-22 energy meter input specifications. High-value or inter-utility settlement metering may require class 0.1.
What is the difference between a metering core and a protection core in a combined unit?
A metering core is optimised for high accuracy at normal operating currents (typically 1–120% of rated current) but saturates quickly during faults to protect connected meters. A protection core remains linear up to its accuracy limit factor (e.g., 20× rated current for 5P20), ensuring relays receive accurate current signals during fault conditions. Most combined units carry both core types.
Is a combined current voltage transformer more expensive than buying a CT and PT separately?
The combined unit typically has a higher unit purchase price than a single CT or PT alone. However, when total installed cost is calculated — including two separate primary connections, additional insulators, separate oil maintenance, and increased wiring complexity — the combined current voltage transformer usually delivers a lower overall project cost for new installations.
What IEC standard governs combined current voltage transformers?
Combined instrument transformers are covered under IEC 61869-1 (general requirements) together with IEC 61869-2 (CT-specific requirements) and IEC 61869-3 (VT-specific requirements). The combined unit must comply with all relevant clauses of both part 2 and part 3 for its respective CT and VT windings.
Conclusion
The choice between a current voltage transformer and a standalone potential transformer is not a matter of one being universally superior — it is a matter of matching the right instrument transformer to the specific demands of the application, the system voltage, and the accuracy requirements in place. For compact MV installations, revenue metering transformer needs at 11–33 kV, and new RMU-based distribution substations in the Philippines, the combined CT VT unit consistently offers a compelling combination of space efficiency, installation simplicity, and cost-effectiveness. For high-accuracy fiscal metering, busbar-level voltage sensing, or extra-high-voltage applications, the standalone PT remains the technically sound and regulatory-compliant choice.
What matters most is specifying the correct accuracy class, verifying secondary burden compliance, and confirming that the selected electrical measuring device meets both IEC 61869 and applicable Philippine grid code requirements. With those fundamentals in place, your current voltage transformer or PT selection will serve reliably for the full service life of the installation.
You may be interested in
Inquire Now
Notice: Please leave your contact information, our professionals will contact you as soon as possible!
企业文化
以科技传承植物智慧,以责任守护健康未来
企业使命
食品更安全,生活更健康
今汉药业始终关注食品安全、天然健康与绿色可持续发展,致力于以植物功能成分和天然解决方案服务食品、营养健康、日化美妆、动物营养及宠物健康等领域,为客户创造更安全、更稳定、更具价值的产品选择。
企业愿景
汇今朝科技,扬汉方精粹
今汉药业坚持以现代科学技术挖掘植物资源价值,推动传统植物智慧与现代研发、绿色制造和产业应用深度融合,让来自东方的植物功能成分走向更广阔的全球市场。
企业发展方向
天然创新健康解决方案
围绕迷迭香、葫芦巴、桑叶等核心植物平台,今汉药业持续推进植物活性成分研究、提取纯化工艺升级和应用场景开发,为食品、营养健康、日化美妆、动物营养和宠物健康行业提供安全、高效、可持续的天然健康解决方案。
企业核心价值观
企业使命
食品更安全,生活更健康
今汉药业始终关注食品安全、天然健康与绿色可持续发展,致力于以植物功能成分和天然解决方案服务食品、营养健康、日化美妆、动物营养及宠物健康等领域,为客户创造更安全、更稳定、更具价值的产品选择。
企业愿景
汇今朝科技,扬汉方精粹
今汉药业坚持以现代科学技术挖掘植物资源价值,推动传统植物智慧与现代研发、绿色制造和产业应用深度融合,让来自东方的植物功能成分走向更广阔的全球市场。
企业发展方向
天然创新健康解决方案
围绕迷迭香、葫芦巴、桑叶等核心植物平台,今汉药业持续推进植物活性成分研究、提取纯化工艺升级和应用场景开发,为食品、营养健康、日化美妆、动物营养和宠物健康行业提供安全、高效、可持续的天然健康解决方案。
企业发展方向
天然创新健康解决方案
围绕迷迭香、葫芦巴、桑叶等核心植物平台,今汉药业持续推进植物活性成分研究、提取纯化工艺升级和应用场景开发,为食品、营养健康、日化美妆、动物营养和宠物健康行业提供安全、高效、可持续的天然健康解决方案。